| Maintenance-free, valve regulated, sealed
lead-acid batteries that are designed for deep cycle and back-up power
photovoltaic applications |
PVX-1080T
- 108 Amp Hour Battery
Sun Xtender? Series Renewable Energy Storage Solar Batteries are sealed,
maintenance free, valve regulated, deep cycle, long life lead acid
batteries. Sun Xtender? Series Renewable Energy Storage Batteries have been
designed and developed to meet the needs of the Renewable Energy Industry.
Concorde Battery Corporation is considered THE solar battery expert
worldwide.
Since 1987 Concorde Battery has been supplying the solar energy,
photovoltaic, and other renewable energy markets with deep cycle Absorbent
Glass Mat (AGM) batteries. Tremendous customer acceptance has made Concorde
Battery Corporation, the manufacturer of Sun Xtender? Series, the leading
battery supplier of solar energy, solar electric, renewable energy, and
numerous other applications.
The new AGM deep
cycle technology far outperforms the gel battery in energy density (capacity
per pound), cycle life, and vibration and shock tolerance. For these reasons
Concorde discontinued producing gel batteries. Concorde is still the only
AGM battery manufacturer with a true deep cycle battery.
Click here for Sun Xtender Manuals & Solar Battery
Technical Information
Uses for the Sun Xtender? Series Renewable Energy Storage Batteries
include stand alone, grid tied and back up renewable power systems. Some
application examples are telecommunications, village power, home power
systems, supervisory control & data acquisition, aids to navigation (sea &
air), cathodic protection, telemetry, lighting plus many more uses.
Standard Terminals: All "T" batteries now incorporate copper alloy M8
terminals except the PVX-340T & PVX-420T which are M6. All batteries
supplied with silicon bronze bolts, nuts, and washers as required for
installation. No exposed lead terminals. This change was made to improve
environmental safety and health. Torque Value M6: 35 in-lbs / 4.0 nm. Torque
Value M8: 70 in-lbs / 7.9 nm. Optional Terminals: L Blade or Automotive post
type terminals are available installed by adding the appropriate suffix: "L"
for L Blade or "A" for automotive post. Handles: All part numbers include
lifting handles except the PVX-490T and PVX-560T. Ratings: Capacity ratings
are stated at 77?F (25?C) to 1.75 volts per cell. Drawings: Click on the
part number in the table above or contact the factory.
SUN-XTENDER? BATTERY DESIGN FEATURES
Copper Alloy Terminals for improved electrical connections.
No exposed lead terminals. This change was incorporated to improve
environmental safety and health.
Threaded insert terminals are recessed to prevent short circuits across
battery connections.1
New cover is flat top design. No protruding or exposed vent valves.1
Built in lifting handles, except PVX-490T and PVX-560T.
Reinforced container walls to reduce bulging.
High Impact Strength Copolymer Polypropylene Case and Cover.
Completely Sealed Valve Regulated Construction.
Immobilized Electrolyte Non-Spillable.
Maintenance Free Design Never Requires Watering.
Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain
electrolyte.
Flame Arresting Pressure Regulated Safety Valves.
UL Recognized Systems Component.
Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates -
Lead Calcium.
Low Self Discharge Rate Approximately 1 % per month at 25?C (77?F).
Operate over a Wide Range of Temperatures from -40?C (-40?F) to +72?C
(+160?F).
Classified as "Non-Spillable Battery" for transport. Complies with DOT
HMR49, Non-Hazardous Materials.
We have battery warehouses in 11 states to
reduce the delivery distance to you. This reduces shipping cost.
Please use "Request Freight Quote" in checkout and we will promptly reply with
lowest shipping cost.
This product was added to our catalog on Saturday 24 May, 2008.
